How to Make a Burnt Peony

I've seen lots of gorgeous burnt edge flowers floating around in blog land lately, and felt inspired to create my own version recently.  

We were invited to a double birthday party for a couple of women we know, and I wanted to bring them something small, but special.

You know how it is when you don't want to bring the same old bottle of wine, but a larger gift isn't really appropriate?   

I thought of all the burnt edge flowers I'd been seeing, and I thought of spring, and so (of course), I thought of peonies!

I love the simple, stylized flowers made from circles (like the ones on Kudzu's blog, here), but I wanted to take advantage of the melting characteristics of the fibers to create something a little more realistically inspired for this project.

To start, I chose three different fabrics for the flower, and two for the foliage.  One of the three fabrics used for the body of the flower is a lot like buckram, but it's polyester.  I used it to give the flowers some "body".  You could also use tulle or regular buckram, but I wouldn't recommend burning the edges on those pieces.  Try to match your thread to your project fabrics.  Since all of our goods are in storage until we find a new house, I needed to buy thread and needles.  We have a fun little Japanese $1.50 store across the street where I was able to find these.

In the spirit of "revival", I used thrifted, repurposed, and vintage fabrics, but you could easily use new fabrics -- you can make two large flowers with three one-third yard pieces plus a few small scraps for the throat of the flower and for the foliage.  While we're discussing fabric, it's important to choose a poly fabric, to get the nicest edge.    

*It's very important not to use acetate or acrylic fabrics (or use them with great care).  These fabrics are very combustible. (This is why you would never choose untreated acetates or acrylics for something like a window treatment-- imagine a candle (or a heater) placed a little too close to the curtain, the flame is drawn toward the fiber or a slight breeze moves the fabric into the flame, and WHOOSH, there is oxygen moving freely around the fabric to feed the flames, fire climbs.... bad news.)

Once you have your poly fabrics, you can decide how big you want your flower to be.

Begin cutting circles out of your fabric (you can freehand this), making each circle progressively smaller.  I used eight circles for each flower, but fewer would have been fine.

Now, light a candle.  Carefully (hot, melted poly can stick to your skin and really burn) pass the edge of the fabric circles through or near the flame.

By passing the fabric near the flame, you have a lot of control over  how much the edge of the fabric will curl.  By passing the fabric through the flame, you can get more of a "burnt" look.

When you have the edge of your circle entirely done, fold the circle in half, and then into thirds.

Then cut "petals" into the fabric.

Quickly pass the "crotches" between the petals back through the flame to seal and shape them.  I found that by doing the petals in this order, I had better control over the fabric, as it was less "floppy".  Repeat the process with all of the circles.

Because some peonies are a little bit "shaggy", I clipped the outside edges on some of the petals and quickly passed them back through the flame.

For the centers of the peonies, cut some small rectangles of your choice of fabrics and snip a "fringe" into one side.  Then pass the fringe over the flame to curl and seal it.  I used five different fabrics for my centers, beginning with a couple of tiny pieces of pink and yellow, then a piece of green, then two of the fabrics that were used on the body of the flower.

For the foliage, I layered two pieces of fabric together and freehanded the shapes.  I then "burnt" the edges of each leaf, and stitched the two layers together with a simple running stitch down the center of each leaf.

Now for the fun part!  You will start from the center of the flower and build out.  First, create your "center".

My first two pieces were only about an inch wide, each.  I rolled the center most piece, then wrapped the next piece around it and stitched them together.

Keep adding to your center, by wrapping the next layer and stitching until you are happy with how it looks.

At this point, trim off the excess fabric that you have been using as a "handle".

Grab the smallest flower petal layer and stitch it to the center, using your needle and thread to manipulate it till you are satisfied with how it looks.

Now, set the center aside, and grab the next two layers from the stack.

Stitch those two layers together, gathering the center slightly, to add dimension.  Now, stitch them to the center of the flower.

Continue in this way until you use up your flower layers, or have the desired flower fullness.

Depending on how much you gather and manipulate during the sewing process, you will have a more compact or more open flower-- the choice is yours.


Next, stitch the foliage to the back of the flower, add a backing if you like, and add pin or a clip.

Wear it on a scarf, or on your t-shirt, or to a formal, or a wedding, or just use it to dress up a handbag!  Smaller versions could dress up a pair of flats. Pin or stitch your flower to a pillow -- or to your curtain tie-backs.  Have fun, adapt the concept, and pass on your ideas!

This post is linking up to the Upcycled Awesome Best of 2010 at The T-Shirt Diaries, DIY Showoff Project Parade,  Just Something I Whipped Up Monday, at The Girl Creative, Make Your Monday at Twice Remembered, It's So Very Creative, at It's so Very Cheri, Met Monday at Between Naps on the Porch, Market Yourself Monday at Sumo's Sweet Stuff, and Spring has Sprung at Fun to Craft, and DIY Day at a Soft Place to Land, Favorite Things Friday at A Few of My Favorite Things, and Strut Your Stuff Thursday at Somewhat Simple.  House of Grace Best of 2010